3005 Aluminum Sheet
Alloy | |
---|---|
Temper | O-H112, T3-T8, T351-T851 |
Surface Treatment | Anodized, Coated, Embossed, Mill Finished, Polished mirror, Powder Coated, Printed |
Thickness | 0.1mm-350mm |
Width | 100mm-2200mm |
Sample | Freely |
Standard | ASTMB209, EN573-1S, etc |
Processing Service | Bending, Decoiling, Welding, Punching, Cutting |
Payment terms | 30% deposit by TT, 70% balance before delivery or 100% L/C at sight |
3005 Aluminum Sheet Product Introduction
3005 aluminum sheet is about 20% stronger than 3003 aluminum sheet, and the corrosion resistance is also better. Therefore, it can also be called anti-rust aluminum plate. In addition, 3005 aluminum sheet belongs to the series with better anti-rust, the price is more expensive than the 1000 series, it is a more commonly used alloy series.
Yongsheng Aluminum can customize processing according to customer needs. All our products are manufactured with advanced equipment and strict QC procedures in order to insures every product's high quality. Sample can be provided as your requirements for free.
Yongsheng 3005 aluminum sheet price is reasonable and very competitive. We also offer 3003 aluminum sheet,3004 aluminum sheet,3104 aluminum sheet, and other types for you to choose from.
3005 Aluminum Sheet
3005 Aluminum Sheet Advantages
1. Excellent Corrosion Resistance. 3005 aluminum sheet can resist corrosion from atmosphere, fresh water, sea water, food, organic acid, gasoline, neutral inorganic solution and so on.
2. Good Formability. 3005 aluminum sheet can exhibit excellent formability and meltability under normal temperature conditions.
3. High Plasticity. In annealing temper, 3005 aluminum sheet has high plasticity. In the case of semi-cold quenching, plasticity is good, while in the process of cold quenching, plasticity is the lowest.
4. Anodizing Property. 3005 aluminum sheetcan be easily anodized, and the surface after anodized is more conducive to color coating and other treatment in the later stage.
5. Mechanical Properties. The tensile strength of3005 aluminum sheet is 140-180 MPa, and the yield strength is 0.2 (MPa) ≥115.
Product Specifications
Yongsheng Aluminum Sheet Basic Parameters
Product Name
|
Aluminum Sheets
|
|||
Alloy/Grade
|
1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series
|
|||
Temper
|
O-H112,T3-T8,T351-T851
|
|||
Thickness
|
0.006mm-6.5 mm(According to customer requirements)
|
|||
Width
|
3 mm-2600 mm(According to customer requirements)
|
|||
Application
|
roofing, ceiling, cladding, gutter, facade wall, etc.
|
|||
Surface treatment
|
Mill Finish、Coated、Powder Coated、Anodized、Polished mirror、Embossed、Etc.
|
|||
Tolerances
|
As per your requirements
|
|||
Delivery time
|
7-30 days after order confirmation
|
|||
MOQ
|
1 ton each size or less if we have the same specification in stock.
|
|||
Loading Port
|
Qingdao Port, Tianjin Port, Shanghai port.
|
|||
Price terms
|
FOB, CIF, CFR, CNF, Etc.
|
|||
Payment terms
|
L/C, D/A, D/P, T/T, West Union, Money Gram, Etc.
|
|||
Package
|
Seaworthy Wooden pallet, Wooden case, Aluminum plate case
|
|||
Our Service
|
We can provide you with free samples and various custom services.
|
3005 Aluminum Sheet Physical Properties
Temper | Thickness (mm) | Tensile Strength (Mpa) | Yield Strength (Mpa) | elongation(%) | hardness(HV) |
0 | >0.2-0.5 | 115-165 | ≥45 | ≥13 | 35-45 |
>0.5-1.0 | ≥20 | ||||
>1.0-4.0 | ≥25 | ||||
H22 | >0.2-0.5 | 145-195 | ≥110 | ≥10 | 30-60 |
>0.5-1.0 | ≥15 | ||||
>1.0-4.0 | ≥15 | ||||
H24 | >0.2-0.5 | 170-215 | ≥130 | ≥6 | 58-70 |
>0.5-1.0 | ≥8 | ||||
>1.0-4.0 | ≥10 | ||||
H26 | >0.2-0.5 | 195-240 | ≥160 | ≥3 | 65-83 |
>0.5-1.0 | ≥4 | ||||
>1.0-4.0 | ≥6 | ||||
H18 | >0.2-0.5 | ≥220 | ≥200 | ≥2 | 80-100 |
>0.5-1.0 | ≥3 | ||||
>1.0-4.0 | ≥3 |
3005 Aluminum Sheet Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
0.6 | 0.7 | 0.30 | 1.0-1.5 | 0.2-0.6 | 0.10 | 0.25 | 0.10 | Remainder |
3005 Aluminum Sheet Performance
The 3000 series aluminum plate can also be called anti-rust aluminum plate, and the production process of Yongsheng 3000 series aluminum plate is relatively excellent. The 3000 series aluminum plate is mainly composed of manganese. The content is between 1.0-1.5. It is a series with better anti-rust function, the price is higher than the 1000 series, and it is a more commonly used alloy series. The strength of 3005 aluminum plate is about 20% higher than that of 3003, and its corrosion resistance is also better.
Aluminum Sheet Packaging
Yongsheng aluminum sheet is placed on a wooden pallet or wooden box, wrapped perfectly with waterproof craft paper, and then fixed with a narrow strip of iron.
Usually, we have six layers of packing: put on wooden supports and put desiccant, wrap moisture proof film, wrap the plastic film, wrap the moisture-proof cotton, wrap the plastic moisture proof film again and pack it with cardboard
aluminum sheet packing process
3005 Aluminum Sheet Application
1. 3005 aluminum sheet is commonly used in air conditioners, refrigerators, automobile bottoms, ocean and other humid environments. It is also commonly used in building materials, ship materials, colored aluminum sheets, kitchen utensils, radiators, battery shells, and general objects such as processing pipes.
2. 3005 aluminum sheet can also be used for parts that need to be processed with good formability and weldability, or that require both of these properties and higher strength than 1000 series alloys. For example, low-load parts used in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes, or other small load parts made from deep drawing.
3005 Aluminum Sheet Application
3005 Aluminum Sheet Factory Supplier
Henan Yongsheng are Aluminum Sheet Suppliers, stockist and manufacturer of Aluminum Sheet.
Our products are exported all over the world and praised by customers, welcome to purchase!
Aluminum Sheet/Plate are cut from aluminum coils. Aluminum Sheet Thickness is 0.1mm-350mm, Width is 100mm-2200mm, as for Length, we will make it according to your requirements.
Aluminum Sheet Production Process
Smelting —— Ingot casting —— Pre-rolling preparation —— Flat roll rolling —— Heat treatment ——Finishing——Final Inspection——Packing——Delivery
Henan Yongsheng Aluminum Co., Ltd. was established in 1999 and occupies 380,000 square meters with 2100 workers. With the development, our company has been honored as one of Top 100 Enterprises in Henan Province, Golden Prize for Economy and Efficiency Cup and Top 30 Enterprises in Zhengzhou.
We are a Chinese Leading aluminum sheet manufacturer, our main products are as following: Aluminum Sheet/Plate/Coil/Strip/Circle/Foil, Color-coated Aluminum, Aluminum Checker Plate, Mirror Aluminum Sheet and so on. Our capacity is 300,000 MT per year, among which, 35% are exported overseas. At the same time, we supply much famous aluminum companies in China.
Welcome to visit our factory and look forward to establishing a long-term business relationship with you!!!