-
Aluminum Strip Coil
-
Color Coated Aluminum Coil
-
Aluminum Foil Roll
-
Aluminum Sheet Plate
-
Aluminum Circle Disc
-
Aluminum Foil Laminated Polyester Film
-
Aluminum Checkered Plate
-
Aluminum Diamond Plate Sheet
-
Embossed Aluminum Sheet
-
Anodized Aluminum Sheet
-
Mirror Aluminum Sheet
-
Aluminum Foil Container
-
Aluminum Foil Lunch Box
-
Disposable BBQ Grill
-
Aluminum Coil
Stress Relieved 5052 H32 6061 T651 Aluminum Plate 6-25mm Flatness 3mm Per Meter Cut to Size
| Place of Origin | Henan Province, China |
|---|---|
| Brand Name | Yongsheng |
| Certification | ISO 9001, ISO 14001, SGS, CE; DNV/ABS/CCS on request |
| Model Number | 5052 H32 / 6061 T651 / 5083 H116 / 7075 T651 |
| Minimum Order Quantity | 1 ton |
| Price | USD 2950-3450 / Ton |
| Packaging Details | PE film per plate, paper interleaved, edge board and corner protectors, steel strapping, seaworthy wooden pallet or reinforced wooden crate |
| Delivery Time | 7-25 days after order confirmation |
| Payment Terms | T/T,D/P,D/A,L/C |
| Supply Ability | 5000 Tons per Month |
This is our stress relieved medium-thick plate line: 6 mm to 25 mm thick, width 1000 mm to 2600 mm, length up to 12000 mm, non-interrupted continuous casting and rolling followed by controlled stretch or roll levelling, so residual stress is released before the plate ever reaches your machining centre. Flatness is held to 3 mm per running metre and thickness tolerance follows ASTM B209, which is what keeps a machined pocket, a mould cavity or a welded hull panel in shape after the last pass. Plates ship against ASTM B209, EN 573-1 and GB/T 3880, with a mill test certificate to EN 10204 3.1 per heat number, and every order can be cut to drawing and packed for sea freight in 5 to 8 working days from stock.
![]()
- Stress relieved, no post-machining movement: plates are stretch levelled and released before shipment, so pockets, slots and mould cavities keep their dimension after machining instead of bowing overnight.
- Flatness held at 3 mm per metre: measured and recorded plate by plate, which protects your fixturing set-up and cuts the shimming and re-facing normally charged to tooling plate jobs.
- Seawater and salt spray corrosion resistance: 5052-H32 (Al-Mg) and 5083-H116 resist pitting and intergranular attack without cladding, holding up under permanent salt spray, immersion and humid coastal air on hull plating, offshore structures and outdoor equipment.
- Full temper range from one source: O, H32, H34, H112, H116, H321, T6 and T651 are all stocked or rolled to order, so a 5052-H32 and a 6061-T651 requirement ship on one contract instead of two, with substitution advice written down when a temper is not available.
- Cut to size, drawing to pallet: saw-cut or waterjet-cut length and width to ±1 mm on the cut edge, chamfered or deburred edges, mounting holes and pockets machined before despatch, so the plate arrives ready for assembly.
- Mill test certificate to EN 10204 3.1: chemical composition, mechanical properties, heat number traceability and dimensional record travel with every consignment, with DNV, ABS, CCS or BV class approval available for marine and offshore purchase orders.
![]()
- Mould bases and tooling: injection, blow and die-cast mould base plates, checking fixtures, jigs, gauge plates and precision measurement platforms, where stress relief and flatness decide whether the cavity stays true after hardening and machining.
- Marine and offshore structures: hull side shell, deck and bottom shell plating, bulkheads, engine seating plates, hatch covers, ladders and railings, offshore platform structural members, walkways and equipment skids exposed to salt spray and immersion for the full design life.
- New energy and thermal management: power battery trays, covers and bottom protection plates, water cooling plate base plates, heat sink bases and inverter housings, using 6061-T651 for machining stability and 167 W/m·K conductivity.
- Heavy machinery and transport: machine base plates, press frames, tanker and truck body panels, silo and hopper linings, and aluminium tank shells where weight is saved against mild steel without losing section strength.
![]()
- Thickness 6-25 mm, width 1000-2600 mm, length 2000-12000 mm, cut to drawing with ±1 mm edge tolerance.
- Alloy and temper mix on one order: 5052, 5083, 5754, 6061, 6082 and 7075 with O, H32, H34, H112, H116, H321, T6 and T651.
- Pre-machining: CNC milling of pockets and ribs, drilled and tapped holes, chamfered or radiused edges, deburring.
- Surface: mill finish, single or double side PE/PVC film, brushed, polished, anodised or chemical conversion coating.
- Documents to project specification: MTC to EN 10204 3.1, dimensional inspection report, and class-approved material for DNV, ABS, CCS or BV.
![]()
- Metallurgical selection support on alloy, temper and thickness against your load case, welding process and exposure, answered within one working day.
- In-house laboratory with spectrometer analysis and mechanical testing; factory audit and third-party inspection by SGS, BV or Intertek arranged on request.
- Free sample plaques in the specified alloy and temper for machining trials before the first commercial order.
- Welding guidance: filler metal selection, pre-weld cleaning and heat input limits for 5052 and 6061, so shop welding does not open porosity or stress corrosion later.
- Order handling on FOB, CIF, CFR and CNF terms with L/C, D/P and D/A payment, mixed-alloy container loading plans, shipment tracking, and a written claim response within 48 hours for any thickness, flatness or surface deviation found on arrival.
![]()
Plate protection. Every plate is wrapped in PE film, or PVC film where the surface must stay scratch free, with paper interleaved between plates so mill finish faces never rub in transit. Brushed, polished and anodised faces get a heavier film plus a cardboard facing sheet, and cut edges are protected with edge boards and corner protectors before strapping.
Bundle and pallet build. Plates are stacked into bundles of up to 2 tons, steel strapped in both directions, then either set on a seaworthy wooden pallet with a plywood top and bottom board or packed into a reinforced wooden crate for cut-to-size and machined parts. Crates are built for forklift entry from both sides, fumigated and ISPM 15 marked for export, and the bundle weight is kept under the lifting limit you specify so your yard can handle it with the equipment it actually has.
Loading and protection against sea damage. Plate bundles are loaded flat, blocked and braced against container walls with timber dunnage, with desiccant bags added inside the container for long ocean legs and humid destinations. For 20GP and 40GP containers we plan the alloy, temper and thickness mix to fill the weight and volume together, so freight per ton stays low instead of leaving a half-empty box. Break bulk and flat rack shipment can be arranged for plates beyond container width or for full project cargo.
Marking and documents. Each bundle carries the alloy, temper, heat number, size, bundle weight and shipping mark you specify, with side marking visible after container loading. The shipping set includes the mill test certificate to EN 10204 3.1, packing list, certificate of origin, commercial invoice and the full set of transport documents, and photos of the packed goods are sent for approval before the container doors close.
Shipping terms and timing. We ship FOB, CIF, CFR and CNF from Qingdao, Tianjin and Shanghai, with L/C, D/P and D/A payment accepted. Stock thicknesses leave the warehouse in 5 to 8 working days, cut-to-size and non-stock tempers in 15 to 30 days, and we confirm the booked vessel, container number and estimated arrival date as soon as the shipment is loaded. Insurance, on deck stowage requests and buyer nominated forwarders are all handled on request.
![]()
Nine cold rolling lines, forty-one casting rolling machines and one 1850 double-coil hot rolling mill run behind this plate, with annual capacity of 450,000 tons and 6,000 tons of first, third, fifth and sixth series base material held in stock. That is why stock thicknesses ship in 5 to 8 working days while cut-to-size and non-stock tempers take 15 to 30 days. Minimum order quantity is 1 ton.
Send alloy, temper, thickness, width, length and surface requirement with your drawing if the plate needs cutting or machining, and we will confirm stock availability, flatness record and price the same working day. Contact us for a quotation and a sample plaque.
