Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Place of Origin Henan Province, China
Brand Name Yongsheng
Certification ISO 9001, RoHS, ASTM B209, EN 10204 3.1
Model Number 6061 T6 5052 H32
Minimum Order Quantity 1 Ton
Price USD 2900-3100 / Ton
Packaging Details PE film per plate, paper interleaved, edge board and corner protectors, steel strapping, seaworthy wooden pallet or reinforced wooden crate
Delivery Time 5-8 working days for stock, 15-30 days for cut to size
Payment Terms L/C,D/A,D/P,T/T
Supply Ability 5000 Tons per Month
Product Details
Leave a Message
Product Description
Stress Relieved Medium Thick Aluminum Plate 10-50mm, Cut to Size with MTC 3.1

This stress relieved medium thick aluminum plate is rolled from 6061 and 5052 alloy, solution heat treated, quenched and then stretched on a tension leveller so that internal residual stress is released before delivery. The result is plate that stays flat after CNC milling, sawing and drilling, with flatness controlled to 3mm per meter and thickness tolerance of plus or minus 0.1mm after double side machining. Every lot is supplied with a mill test certificate to EN 10204 3.1 showing heat number, chemical composition and mechanical properties, and every order can be cut to your final blank size so no further preparation is needed on your shop floor.

Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Technical Specifications

Alloy6061, 5052 (5083, 5754, 6063, 6082 available on request)

Temper6061: T4, T6, T651; 5052: O, H32, H34, H112; 5083: H321, H116

Thickness10mm - 50mm, medium thick range, cut to any thickness step of 0.5mm

Width100mm - 2600mm, cut to size

Length500mm - 12000mm, cut to size

Flatness3mm per meter after stress relief, tighter on request

Tensile Strength6061 T651 at least 310 MPa; 5052 H32 at least 215 MPa; 5083 H321 at least 305 MPa

Yield Strength6061 T651 at least 276 MPa; 5052 H32 at least 160 MPa

Elongation6061 T651 at least 8 percent; 5052 H32 at least 12 percent

Hardness6061 T651 about 95 HB; 5052 H32 about 60 HB

StandardsASTM B209, EN 573-1, EN 485-1, GB/T 3880.1-2006, JIS H4000

CertificateMill test certificate EN 10204 3.1 with heat number traceability for each lot

ToleranceThickness plus or minus 0.3mm as rolled, plus or minus 0.1mm after double side machining; width plus or minus 2mm; diagonal difference within 2mm on cut blanks

Inspection100 percent dimension and thickness check, ultrasonic testing, hardness testing, third party inspection SGS, BV or Intertek

Stress Relieved and Flat, Ready for Machining
  • Tension levelled plate: residual stress released by stretching, so parts do not bow or twist after face milling and pocketing.
  • Flatness 3mm per meter: measured on a granite table, suitable for vacuum table clamping and precision fixture work.
  • Thickness tolerance plus or minus 0.1mm: available with double side machining when a machined finish is required.
  • Tooling and mold base ready: commonly used for mold bases, jigs, fixtures, base plates and machine tool tables.
  • Stable after welding and cutting: low distortion during laser cutting, plasma cutting and MIG welding.

Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Cut to Size Service
  • Drawing based cutting: send a 2D drawing or 3D model, we return a tolerance confirmation drawing before production.
  • Cutting methods: band saw cutting for thick plate, CNC plasma and water jet cutting for contour shapes, laser cutting for thin sections, circular saw for straight blanks.
  • Secondary operations: edge milling and chamfering, drilling, tapping, countersinking, milling slots and pockets, bending and rolling.
  • Blank accuracy: length and width tolerance plus or minus 1mm, squareness within 0.5mm per meter, diagonal difference within 2mm.
  • Nest cutting: we optimize layout on standard 1220x2440mm or 1500x3000mm plate to reduce your material waste and cost.
Material Quality and Certification
  • Mill test certificate EN 10204 3.1: issued per heat number with chemical composition, tensile strength, yield strength and elongation.
  • Traceability: heat number laser marked or ink jet marked on each plate, QR code traceability available for warehouse management.
  • Chemical composition control: Mg, Si, Cu, Mn and Fe checked against ASTM B209 limits before rolling.
  • Ultrasonic testing: available on request for pressure vessel and mold base applications, report supplied with the certificate package.
  • Factory audit: ISO 9001 certified plant, in house laboratory, SGS and BV audited supplier, factory video tour and live inspection welcomed.
Corrosion Resistance and Weldability
  • 5052 and 5083 marine grade: excellent resistance to seawater, salt spray and industrial atmosphere, suitable for ship deck, hatch cover and offshore structures.
  • Chemical resistance: good resistance to mild acids, alkali solutions, fuel, diesel, lubricating oil and food liquids.
  • Weldability: MIG and TIG welding with 5356 or 5183 filler wire, weld efficiency up to 90 percent, no preheating needed for 5052 and 5083.
  • Formability: 5052 O and H32 plate can be bent and rolled; 6061 T651 is intended for machining rather than severe forming.
  • Surface protection: PE film in blue, white or transparent applied on both sides to prevent scratching during transport and handling.
Applications in Detail
1. Mold Base and Tooling
  • Mold base plate, cavity backing plate (6061 T651): stress relieved and flat, stable dimension after deep pocket milling, good machinability and polishing performance.
  • Jig, fixture, checking gauge base (6061 T651): low residual stress keeps measurement accuracy after machining, flatness 3mm per meter or better.
  • Machine tool table, vacuum chuck plate (5052 H32, 6061 T651): uniform thickness after double side machining, no bowing under clamping force.
2. Transportation and New Energy Vehicles
  • EV battery tray base plate and pack housing (6061 T6, 5754): flat cut blanks for laser welding, stable module mounting holes, weight saving against steel.
  • Chassis reinforcement, suspension bracket, cross member (6061 T651): high yield strength and low distortion for safety critical parts.
  • Truck frame rail, bus body skin, tanker shell (6061 T6, 5052 H32, 5083): cut to length blanks, corrosion resistance for long service life.
3. Rail Transit
  • Car body structure, underframe beam, floor plate (6061 T651, 5083, 6082): stable mechanical properties after MIG welding, flat plate for floor bonding.
  • Side wall, roof section, interior partition (5052 H32, 5754): good formability for curved profiles and consistent paint adhesion.
4. Pressure Vessels and Chemical Equipment
  • Chemical storage tank, reactor shell, heat exchanger tube sheet (5052 H32, 5083): certified material with 3.1 certificate, weldable thick section for pressure duty.
  • LNG tank and cryogenic vessel (5083 O, 5052 O): no ductile to brittle transition down to minus 196 degrees Celsius.
  • Gas cylinder, air receiver, vessel head blank (6061 T6, 5083): consistent thickness tolerance supports reliable pressure calculation.
5. Marine, Piping and Process Equipment
  • Ship deck, hatch cover, offshore platform plate (5083 H321, 5052 H32): seawater corrosion resistance with classification society approval available.
  • Chemical piping flange, blind plate, food processing table (6061 T6, 5052 H32): machined flat surface for gasket sealing, hygienic and easy to clean.

Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Customization

Every order is produced to your drawing. Customization options below are confirmed at quotation stage and verified by our engineering team before production.

  • Alloy and temper: 6061 T4 / T6 / T651, 5052 O / H32 / H34 / H112, 5083 H321 / H116, plus 5754, 6063, 6082 and 7075 on request.
  • Thickness, width and length: thickness 10mm to 50mm, width 100mm to 2600mm, length 500mm to 12000mm, cut to final blank size with nesting optimization.
  • Cutting and machining: band saw, CNC plasma, water jet and laser cutting, edge milling and chamfering, drilling, tapping, countersinking, milling slots and pockets, bending and rolling. We work from your 2D drawing or 3D model and supply finished blanks ready for assembly, which reduces your in house machining time and scrap rate.
  • Stress relief and flatness: tension levelled as standard, double side machined plate with flatness 0.1mm per 300mm available for precision tooling.
  • Surface treatment: mill finish, PE protective film, anodizing, hard anodizing, powder coating in RAL colors, brushing, embossing and anti slip finish.
  • Marking and traceability: heat number laser marking, ink jet alloy and temper marking, customer logo stencil, QR code traceability, neutral packing for distributors.
  • Packing and branding: wooden pallet, plywood case, steel frame, VCI film for long sea transit, custom pallet size for 20ft or 40ft container, buyer brand label.
  • Documentation: mill test certificate EN 10204 3.1, material traceability report, ultrasonic testing report, RoHS and REACH declaration, dimensional inspection report, third party inspection by SGS, BV or Intertek.

Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Support and Services
  • Free sample: A4 size sample of 6061 T651 or 5052 H32 supplied free of charge for material verification, courier cost collect or prepaid by agreement.
  • Pre sales technical support: alloy and temper selection advice, thickness and weight calculation, flatness and tolerance consultation, drawing review within 24 hours.
  • Quotation service: quotation on FOB, CIF, CFR, CNF or EXW basis, itemized cost for plate and machining, price validity 15 days, container loading plan with weight and volume optimization.
  • Stock and lead time: regular stock of 6061 T651 and 5052 H32 in 10mm, 12mm, 15mm, 20mm, 25mm and 30mm, 5 to 8 working days for stock items, 15 to 30 days for cut to size orders, urgent arrangement available.
  • Quality assurance: 100 percent thickness and dimension inspection, ultrasonic and hardness testing, third party inspection SGS, BV or Intertek, container loading photos, sealed sample retained for 12 months, replacement or credit for confirmed quality deviation.
  • Logistics service: booking, consolidation with other aluminum products, container loading supervision, shipping documents including B/L, packing list, invoice, certificate of origin, FORM E and FORM A on request.
  • After sales service: response within 8 working hours, claim handling with photo evidence, technical guidance for further processing and welding parameters.
  • Payment and trade terms: T/T, L/C at sight, L/C 60 days, D/P, D/A, West Union, trade assurance, 30 percent deposit with balance against B/L copy.
Packing and Delivery
  • PE protective film per plate, paper interleaved between plates, edge board and corner protectors, steel strapping.
  • Seaworthy wooden pallet or reinforced wooden crate with fumigation certificate, VCI film for long sea transit.
  • Bundle weight, shipping marks, container loading plan and loading photos provided before shipment.
  • Loading ports Qingdao, Tianjin and Shanghai; heavy gauge plate loaded by 20ft or 40ft container with steel frame reinforcement.

Stress Relieved 6061 T651 5052 H32 Medium Thick Aluminum Plate 10-50mm Cut to Size MTC

Why Order From Us
  • Factory strength: established in 2001, 780000 square meters plant, 9 cold rolling lines, 41 casting rolling machines, one 1850 double coil hot rolling mill, annual capacity 450000 tons.
  • Experience: 25 years of aluminum plate production and export, 35 percent of output exported to North America, Europe, Southeast Asia and the Middle East.
  • Quality system: ISO 9001 certified, in house laboratory, SGS audited supplier, CE and RoHS documentation available.
  • Service team: English speaking sales engineers, technical support in your time zone, response within 8 working hours.
Send us your drawing, alloy, temper and flatness requirement, and we will reply with a quotation, MTC sample and delivery schedule within one working day.