Food Grade 1050 1060 Aluminum Strip Coil SGS Certified Free Sample 100% Recyclable for Kitchenware

This food grade aluminum strip coil is rolled from 1050 and 1060 alloy in Henan Province, China, on cold rolling lines dedicated to cookware and kitchenware stock. The surface is degreased, oil residue controlled and coil interleaved so the strip reaches the customer clean enough for direct blanking and deep drawing without an extra cleaning step.

Each lot is supplied with mill test certificate covering chemical composition and mechanical properties, and can be accompanied by SGS inspection reports, ASTM B209 and EN573-1 conformity statements as well as RoHS declarations. Food contact compliance documents are issued on request, which allows kitchenware and household appliance buyers to clear incoming material inspection without a third round of testing.

Certification package per shipment: SGS third party inspection, ISO 9001 quality system certificate, ASTM B209 dimensional and mechanical report, EN573-1 chemical composition report, RoHS declaration, food contact statement.

A4 size and 300mm x 300mm samples are supplied free of charge, with coil identification, alloy, temper and thickness marked on the sample tag. Samples are dispatched within 3 working days by courier so a buyer can run a trial blanking or anodising test before placing the first order. Freight for samples is collected or prepaid at cost, both options are available.

Aluminium strip remains 100% recyclable without loss of properties, and the 1050 and 1060 grades used here are single alloy stock with no mixed scrap, which simplifies the customer’s own scrap segregation and resale. This supports the recycled content and packaging waste requirements increasingly requested by European and North American retail buyers.

Pots, pans, pressure cooker bodies, kettles, rice cooker liners, baking trays and cookware lids are blanked and deep drawn from 1050 and 1060 strip in O temper. The controlled oil residue and even thickness let the customer skip pre-cleaning before press forming and polishing, and the fine grain gives a clean surface after spinning and buffing.

Food trays, container closures, sealing lids, conveyor guards and machine covers for food processing lines, where a documented food contact statement and RoHS declaration are required by the buyer’s quality department.

Refrigerator inner liners, microwave housings, washing machine trims, range hood panels and oven door frames, formed from H14 and H24 temper strip that holds shape after bending without spring back issues.

Strips slit down to 10mm are used for utensil handles, edge trims, decorative rings, nameplate blanks and small stamped hardware, where a narrow, burr controlled edge reduces tool wear on high speed presses.

The same food grade coil serves anodising and coating lines for decorative kitchen accessories, since the clean, uniform surface avoids streaking and blotching after the finishing step.

Width can be slit from 10mm to 1250mm, thickness from 0.2mm to 3.0mm, coil weight from 1 to 5 tons, with 508mm or 610mm inner diameter. Tempered, brushed and color coated variants are produced from the same alloy batch, and PE film or paper interleaving can be added to protect the food grade surface during transit and press feeding.

Technical support covers alloy and temper selection for deep drawing, blanking and polishing operations, plus guidance on food contact documentation for destination market clearance. Mill test certificates, dimensional inspection records, SGS reports and RoHS declarations are issued with each shipment, and pre shipment sample verification can be arranged.

Each coil is eye to sky stacked on a fumigated wooden pallet, wrapped in anti-rust paper and waterproof film, edge protected and steel strapped, with the food grade surface covered by PE film where required. Standard seaworthy packing suits container shipment, and shipping marks plus coil identification tags are applied as specified.