5252 Aluminum Sheet
| Alloy | |
|---|---|
| Surface Treatment | Anodized, Coated, Embossed, Mill Finished, Polished mirror, Powder Coated, Printed |
| Temper | O-H112, T3-T8, T351-T851 |
| Thickness | 0.1mm-350mm |
| Width | 100mm-2200mm |
| Sample | Freely |
| Standard | ASTMB209, EN573-1S, etc |
| Price terms | FOB, CIF, CFR, CNF, etc. |
| Quality Control | Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
5252 Aluminum Sheet Product Introduction
5252 aluminum sheet is 5000 series aluminum alloy. The main alloy additive is magnesium, which is formulated for the first time to be forged. 5252 is the Aluminum Association (AA) name for this material. In the European standard, its name is EN AW-5252. A95252 is the UNS number. The EN chemical name is AlMg2,5 (B). It was first given a standard name in 1961. 5252 aluminum flake is an oxidizing material for the aluminum processing industry.
Yongsheng 5252 aluminum quality far beyond international standards, and for global users to provide the original factory warranty! 18 years of experience in the source manufacturers, we can supply competitive price. Sample can be provided as per your requirements for free.
Yongsheng 5252 aluminum sheet price is reasonable and very competitive. We also offer 5A02 aluminum sheet,5A03 aluminum sheet,5A05 aluminum sheet, and other types for you to choose from.
5252 Aluminum Sheet
5252 Aluminum Sheet Advantages
1. 5252 aluminum sheet has good oxidation and coloring effect, and has better metal texture and metal hardness.
2. 5252 aluminum sheet is Al-Mg series rust-proof aluminum alloy, which cannot be strengthened by heat treatment.
3. The chemical composition of 5252 alloy is similar to that of 5A02 alloy, and its properties are basically the same as 5A02. The alloy has higher plasticity and lower strength.
4. Although 5052 aluminum sheet has medium strength, it has excellent corrosion resistance and is easy to manufacture.
Product Specifications
Yongsheng Aluminum Sheet Basic Parameters
|
Product Name
|
Aluminum Sheets
|
|||
|
Alloy/Grade
|
1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series
|
|||
|
Temper
|
O-H112,T3-T8,T351-T851
|
|||
|
Thickness
|
0.006mm-6.5 mm（According to customer requirements）
|
|||
|
Width
|
3 mm-2600 mm（According to customer requirements）
|
|||
|
Application
|
roofing, ceiling, cladding, gutter, facade wall, etc.
|
|||
|
Surface treatment
|
Mill Finish、Coated、Powder Coated、Anodized、Polished mirror、Embossed、Etc.
|
|||
|
Tolerances
|
As per your requirements
|
|||
|
Delivery time
|
7-30 days after order confirmation
|
|||
|
MOQ
|
1 ton each size or less if we have the same specification in stock.
|
|||
|
Loading Port
|
Qingdao Port, Tianjin Port, Shanghai port.
|
|||
|
Price terms
|
FOB, CIF, CFR, CNF, Etc.
|
|||
|
Payment terms
|
L/C, D/A, D/P, T/T, West Union, Money Gram, Etc.
|
|||
|
Package
|
Seaworthy Wooden pallet, Wooden case, Aluminum plate case
|
|||
|
Our Service
|
We can provide you with free samples and various custom services.
|
|||
5252 Aluminum Sheet Chemical Composition
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 0.25 | 0.4 | 0.1 | 0.1 | 2.2-2.8 | _ | 0.2 | 0.02-0.10 | Remainder |
Aluminum Sheet Series Introduction
| 1000 Series | Industrial Pure Aluminum(1050,1060 ,1070, 1100) |
| 3000 Series | Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) |
| 5000 Series | Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) |
| 6000 Series | Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) |
| 7000 Series | Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) |
Packaging of Aluminum Sheet
Yongsheng aluminum sheet is placed on a wooden pallet or wooden box, wrapped perfectly with waterproof craft paper, and then fixed with a narrow strip of iron.
Usually, we have six layers of packing: put on wooden supports and put desiccant, wrap moisture proof film, wrap the plastic film, wrap the moisture-proof cotton, wrap the plastic moisture-proof film again and pack it with cardboard.
aluminum sheet packing
5252 Aluminum Sheet Mechanical Properties
- Tensile strength (σb ): 170～305MPa
- Conditional yield strength σ0.2 (MPa)≥90
- Elastic modulus (E): 69.3～70.7Gpa
- Annealing temperature: 345°C.
Note: Longitudinal mechanical properties of bar at room temperature
Sample size: bar diameter (square bar, hexagonal bar inscribed circle diameter) ≤ 150
5252 Aluminum Sheet Application
5252 aluminum sheet is used in the production of high-strength decorative parts, such as those used in automobiles. It has a bright and transparent oxide film after anodizing, so it is widely used in mobile phone cases, air-conditioning cases, and other fields requiring high oxidation effects and metal texture. There are additional applications that correspond to the properties of 5252 aluminum sheet.
Aluminum Sheet Production Process
Smelting —— Ingot casting —— Pre-rolling preparation —— Flat roll rolling —— Heat treatment ——Finishing——Final Inspection——Packing——Delivery
Henan Yongsheng Aluminum Co., Ltd. was established in 1999 and occupies 380,000 square meters with 2100 workers. With the development, our company has been honored as one of Top 100 Enterprises in Henan Province, Golden Prize for Economy and Efficiency Cup and Top 30 Enterprises in Zhengzhou.
We are a Chinese Leading aluminum sheet manufacturer, our main products are as following: Aluminum Sheet/Plate/Coil/Strip/Circle/Foil, Color-coated Aluminum, Aluminum Checker Plate, Mirror Aluminum Sheet and so on. Our capacity is 300,000 MT per year, among which, 35% are exported overseas. At the same time, we supply much famous aluminum companies in China.
Welcome to visit our factory and look forward to establishing a long-term business relationship with you!!!
English 
Spanish 
German 
French 
Arabic 
Portuguese 
Russian 
Japanese 
Turkish 
Vietnamese