5A05 Aluminum Sheet
Alloy | |
---|---|
Temper | O-H112, T3-T8, T351-T851 |
Surface Treatment | Anodized, Coated, Embossed, Mill Finished, Polished mirror, Powder Coated, Printed |
Thickness | 0.1mm-350mm |
Width | 100mm-2200mm |
Sample | Freely |
Standard | ASTMB209, EN573-1S, etc |
Price terms | FOB, CIF, CFR, CNF, etc. |
Processing Service | Bending, Decoiling, Welding, Punching, Cutting |
5A05 Aluminum Sheet Product Introduction
The 5A05 aluminum sheet is an Al-Mg series rust-proof aluminum alloy. The alloy has a higher magnesium content and a lower strength, which is similar to that of 5A03 alloy. It is mainly used for low-load parts that require high plasticity and good weldability, and work in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
5A05 aluminum sheet, one of the advantages of Yongsheng Aluminum products, the performance of the international standards are leading, and can be customized for the global user! With 23 years of experience in the source manufacturers, we can supply competitive prices.
Yongsheng 5A05 aluminum sheet price is reasonable and very competitive. We also offer 5A03 aluminum sheet,5A05 aluminum sheet,5A06 aluminum sheet, and other types for you to choose from.
5A05 Aluminum Sheet
5A05 Aluminum Sheet Advantages
1. Since 5A05 aluminum sheet also belongs to 5 series alloy, its main characteristics are low density, high tensile strength and high elongation. The weight of aluminum-magnesium alloy is lower than other series under the same area.
2. High strength, especially anti-fatigue strength.
3. High corrosion resistance, can not be strengthened by heat treatment.
4. Plasticity is good during semi-cold work hardening, low plasticity when cold work hardening, good weldability, and can be polished.
5. It belongs to the hot-rolled aluminum sheet series, so it can be used for deep oxidation processing.
Product Specifications
Yongsheng Aluminum Sheet Basic Parameters
Product Name
|
Aluminum Sheets
|
|||
Alloy/Grade
|
1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series
|
|||
Temper
|
O-H112,T3-T8,T351-T851
|
|||
Thickness
|
0.006mm-6.5 mm(According to customer requirements)
|
|||
Width
|
3 mm-2600 mm(According to customer requirements)
|
|||
Application
|
roofing, ceiling, cladding, gutter, facade wall, etc.
|
|||
Surface treatment
|
Mill Finish、Coated、Powder Coated、Anodized、Polished mirror、Embossed、Etc.
|
|||
Tolerances
|
As per your requirements
|
|||
Delivery time
|
7-30 days after order confirmation
|
|||
MOQ
|
1 ton each size or less if we have the same specification in stock.
|
|||
Loading Port
|
Qingdao Port, Tianjin Port, Shanghai port.
|
|||
Price terms
|
FOB, CIF, CFR, CNF, Etc.
|
|||
Payment terms
|
L/C, D/A, D/P, T/T, West Union, Money Gram, Etc.
|
|||
Package
|
Seaworthy Wooden pallet, Wooden case, Aluminum plate case
|
|||
Our Service
|
We can provide you with free samples and various custom services.
|
5A05 Aluminum Sheet Chemical Composition
Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.2 | _ | Remainder |
Aluminum Sheet Series Introduction
1000 Series | Industrial Pure Aluminum(1050,1060 ,1070, 1100) |
3000 Series | Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) |
5000 Series | Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) |
6000 Series | Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) |
7000 Series | Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) |
Packaging of Aluminum Sheet
Yongsheng aluminum sheet is placed on a wooden pallet or wooden box, wrapped perfectly with waterproof craft paper, and then fixed with a narrow strip of iron.
Usually, we have six layers of packing: put on wooden supports and put desiccant, wrap moisture-proof film, wrap the plastic film, wrap the moisture-proof cotton, wrap the plastic moisture-proof film again and pack it with cardboard.
aluminum sheet packing
5A05 Aluminum Sheet Mechanical Properties
- Tensile strength σb (MPa): ≥225
- Conditional yield strength σ0.2(MPa): ≥110
- Elongation δ10(%): ≥1
- Specimen Size: all wall thickness
Note: longitudinal mechanical properties of tubes at room temperature
5A05 Aluminum Sheet Application
Uses are mainly used for low-load parts that require high plasticity and good weldability, such as fuel tanks (because they weigh less than other series aluminum alloys in the same area, they can also be used for aircraft fuel tanks), gasoline Or lubricating oil pipes, various liquid containers and other small load parts made by deep drawing. The wire is used for welding rods and rivets (requires anodizing). In foreign countries, similar alloys of 5A05 aluminum sheet (such as 5456) are used to make armor plates and high-strength structural parts. Storage tanks, pressure vessels, and marine components.
5XXX Series VS 6XXX Series
The 5-series aluminum profile uses magnesium as the main alloying element, and the magnesium content is 3-5%, so it is also called aluminum-magnesium alloy (Al-Mg). The main models are 5005, 5050, 5252, 5083, etc., which are a kind of More commonly used aluminum profiles.
6-series aluminum profiles use magnesium-selenium as the main alloying element, also known as aluminum-magnesium-selenium alloy (Al-Mg-Si), the main models are: 6005, 6061, 6063, 6101, 6351, 6A02, etc. Advantages of profiles.
Aluminum Sheet Production Process
Smelting —— Ingot casting —— Pre-rolling preparation —— Flat roll rolling —— Heat treatment ——Finishing——Final Inspection——Packing——Delivery
Henan Yongsheng Aluminum Co., Ltd. was established in 1999 and occupies 380,000 square meters with 2100 workers. With the development, our company has been honored as one of Top 100 Enterprises in Henan Province, Golden Prize for Economy and Efficiency Cup and Top 30 Enterprises in Zhengzhou.
We are a Chinese Leading aluminum sheet manufacturer, our main products are as following: Aluminum Sheet/Plate/Coil/Strip/Circle/Foil, Color-coated Aluminum, Aluminum Checker Plate, Mirror Aluminum Sheet and so on. Our capacity is 300,000 MT per year, among which, 35% are exported overseas. At the same time, we supply much famous aluminum companies in China.
Welcome to visit our factory and look forward to establishing a long-term business relationship with you!!!