7A04 Aluminum Sheet
| Alloy | |
|---|---|
| Temper | O-H112, T3-T8, T351-T851 |
| Surface Treatment | Anodized, Coated, Embossed, Mill Finished, Polished mirror, Powder Coated, Printed |
| Thickness | 0.1mm-350mm |
| Width | 100mm-2200mm |
| Sample | Freely |
| Standard | ASTMB209, EN573-1S, etc |
| Loading Port | Qingdao Port,Tianjin Port,Shanghai port. |
| Quality Control | Mill Test Certification is supplied with shipment,Third Part Inspection is acceptable. |
7A04 Aluminum Sheet Product Introduction
7A09 belongs to the Al-Zn-Mg-Cu series ultra-high strength aluminum alloy, also known as ultra-hard aluminum. It is a relatively mature and widely used alloy in ultra-hard aluminum. It is a good aluminum material for aerospace. The advantages of 7A04 aluminum sheet/plate used in aircraft aluminum plates are to reduce aircraft fuel consumption, increase aircraft flight speed, increase loading capacity and reduce aircraft weight.
All our products are manufactured with advanced equipment and strict QC procedures in order to insures every product's high quality. 18 years of experience in the source manufacturers, we can supply competitive prices. Sample can be provided as per your requirements for free.
We also offer 7A09 aluminum sheet,7050 aluminum sheet,7075 aluminum sheet, and other types for you to choose from.
7A04 Aluminum Sheet
7A04 Aluminum Sheet Advantages
1. High-strength heat-treatable alloy.
2. Good mechanical properties and processability.
3. Easy to process and good wear resistance.
4. Good corrosion resistance (better corrosion resistance under artificial aging temper) and good oxidation resistance.
5. Annealing and fresh quenching temper plasticity moderate
6. Spot welding has good weldability and poor gas welding.
7. The machinability after heat treatment is good, but the machinability after annealing is not good.
Product Specifications
Yongsheng Aluminum Sheet Basic Parameters
|
Product Name
|
Aluminum Sheets
|
|||
|
Alloy/Grade
|
1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series
|
|||
|
Temper
|
O-H112,T3-T8,T351-T851
|
|||
|
Thickness
|
0.006mm-6.5 mm（According to customer requirements）
|
|||
|
Width
|
3 mm-2600 mm（According to customer requirements）
|
|||
|
Application
|
roofing, ceiling, cladding, gutter, facade wall, etc.
|
|||
|
Surface treatment
|
Mill Finish、Coated、Powder Coated、Anodized、Polished mirror、Embossed、Etc.
|
|||
|
Tolerances
|
As per your requirements
|
|||
|
Delivery time
|
7-30 days after order confirmation
|
|||
|
MOQ
|
1 ton each size or less if we have the same specification in stock.
|
|||
|
Loading Port
|
Qingdao Port, Tianjin Port, Shanghai port.
|
|||
|
Price terms
|
FOB, CIF, CFR, CNF, Etc.
|
|||
|
Payment terms
|
L/C, D/A, D/P, T/T, West Union, Money Gram, Etc.
|
|||
|
Package
|
Seaworthy Wooden pallet, Wooden case, Aluminum plate case
|
|||
|
Our Service
|
We can provide you with free samples and various custom services.
|
|||
7A04 Aluminum Sheet Chemical Composition
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 0.5 | 0.5 | 1.4-2.0 | 0.2-0.6 | 1.8-2.8 | 0.10-0.25 | 5.0-7.0 | 0.1 | Remainder |
Aluminum Sheet Series Introduction
| 1000 Series | Industrial Pure Aluminum(1050,1060 ,1070, 1100) |
| 3000 Series | Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105) |
| 5000 Series | Al-Mg alloys(5052, 5083, 5754, 5005, 5086,5182) |
| 6000 Series | Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02) |
| 7000 Series | Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05) |
7A04 Aluminum Sheet Mechanical Properties
- Tensile strength σb (MPa): ≥530
- Conditional yield strength σ0.2 (MPa): ≥400
- Elongation δ10 (%): ≥5
Note: Longitudinal mechanical properties of pipe at room temperature
Specimen Size: All Thicknesses
Packaging of Aluminum Sheet
Yongsheng aluminum sheet is placed on a wooden pallet or wooden box, wrapped perfectly with waterproof craft paper, and then fixed with a narrow strip of iron.
Usually, we have six layers of packing: put on wooden supports and put desiccant, wrap moisture-proof film, wrap the plastic film, wrap the moisture-proof cotton, wrap the plastic moisture-proof film again and pack it with cardboard.
aluminum sheet packing
7A04 Aluminum Sheet Application
Aviation fixtures, trucks, tower buildings, marine aluminum plates, pipelines, etc. need to have strength, weldability, and corrosion resistance in buildings. Such as aircraft parts, gears and shafts, fuse parts, instrument inlet shafts and gears, missile parts, turbines, keys, aircraft, aerospace and defense applications.
7A04 Aluminum Sheet Price
Yongsheng is a 7A04 aluminum sheet manufacturer and factory. If you want to buy 7A04 aluminum alloy sheets, please contact us for a free quote.
Yongsheng 7A04 Aluminum Sheet price = Ingot Cost/Raw aluminum cost + Processing cost.
7A04 Aluminum Plate pricelist is $/ton,$/kg,$/Pound,$/lbs.
7A04 Aluminum Plate price will be different as per the below factors. Such as Length, Width, Thickness, State, Surfaces Treatment.
Business Term: FOB, CFR, CIF, DDP, DUP…
Payment Term: TT.LC.TT+LC…
Aluminum Sheet Production Process
Smelting —— Ingot casting —— Pre-rolling preparation —— Flat roll rolling —— Heat treatment ——Finishing——Final Inspection——Packing——Delivery
Henan Yongsheng Aluminum Co., Ltd. was established in 1999 and occupies 380,000 square meters with 2100 workers. With the development, our company has been honored as one of Top 100 Enterprises in Henan Province, Golden Prize for Economy and Efficiency Cup and Top 30 Enterprises in Zhengzhou.
We are a Chinese Leading aluminum sheet manufacturer, our main products are as following: Aluminum Sheet/Plate/Coil/Strip/Circle/Foil, Color-coated Aluminum, Aluminum Checker Plate, Mirror Aluminum Sheet and so on. Our capacity is 300,000 MT per year, among which, 35% are exported overseas. At the same time, we supply much famous aluminum companies in China.
Welcome to visit our factory and look forward to establishing a long-term business relationship with you!!!
English 
Spanish 
Arabic 
German 
French