3A21 Aluminum Sheet
| Alloy | |
|---|---|
| Temper | O-H112, T3-T8, T351-T851 |
| Surface Treatment | Anodized, Coated, Embossed, Mill Finished, Polished mirror, Powder Coated, Printed |
| Thickness | 0.1mm-350mm |
| Width | 100mm-2200mm |
| MOQ | We can accept 500kg each size or less if we have the same specification in stock. |
| Sample | Freely |
| Standard | ASTMB209, EN573-1S, etc |
| Delivery time | Future Goods: 15-30 days, Ready stock: 7-10 days |
3A21 Aluminum Sheet Product Introduction
3A21 aluminum sheet is also a typical 3 series Al-Mn antirust alloy, 3A21 aluminum alloy has the characteristics of excellent corrosion resistance, good formability and weldability, and appropriate strength, etc., so it is widely used in both these properties and the conditions requiring higher strength than the 1-series alloy, or the low-load parts working in liquid and gas medium, etc.
Yongsheng Aluminum can customize processing according to customer needs. All our products are manufactured with advanced equipment and strict QC procedures in order to insures every product's high quality. Sample can be provided as your requirements for free.
Yongsheng 3A21 aluminum sheet price is reasonable and very competitive. We also offer 3104 aluminum sheet,3105 aluminum sheet,3M03 aluminum sheet, and other types for you to choose.
3A21 Aluminum Sheet
3A21 Aluminum Sheet Advantages
1. Excellent Corrosion Resistance. The 3A21 aluminum sheet is close to the corrosion resistance of industrial pure aluminum, has good corrosion resistance to atmosphere, fresh water, seawater and some acids, etc.
2. Better Plasticity. The plasticity of 3A21 aluminum alloy is very high in the annealing state, good in the case of semi-cold hardening, and low in the case of cold hardening.
3. Good Weldability. 3A21 aluminum sheet has good spot welding, gas welding, argon arc welding and other welding effects.
4. Mechnical Properties. 3A21 aluminum sheet tensile strength σb (MPa) is 120-160, conditional yield strength σ0.2 (MPa)≥8, elongation δ10≤2%.
Product Specifications
Yongsheng Aluminum Sheet Basic Parameters
|
Product Name
|
Aluminum Sheets
|
|||
|
Alloy/Grade
|
1000 Series, 2000 Series, 3000 Series, 5000 Series, 6000 Series, 7000 Series,8000 Series
|
|||
|
Temper
|
O-H112,T3-T8,T351-T851
|
|||
|
Thickness
|
0.006mm-6.5 mm（According to customer requirements）
|
|||
|
Width
|
3 mm-2600 mm（According to customer requirements）
|
|||
|
Application
|
roofing, ceiling, cladding, gutter, facade wall, etc.
|
|||
|
Surface treatment
|
Mill Finish、Coated、Powder Coated、Anodized、Polished mirror、Embossed、Etc.
|
|||
|
Tolerances
|
As per your requirements
|
|||
|
Delivery time
|
7-30 days after order confirmation
|
|||
|
MOQ
|
1 ton each size or less if we have the same specification in stock.
|
|||
|
Loading Port
|
Qingdao Port, Tianjin Port, Shanghai port.
|
|||
|
Price terms
|
FOB, CIF, CFR, CNF, Etc.
|
|||
|
Payment terms
|
L/C, D/A, D/P, T/T, West Union, Money Gram, Etc.
|
|||
|
Package
|
Seaworthy Wooden pallet, Wooden case, Aluminum plate case
|
|||
|
Our Service
|
We can provide you with free samples and various custom services.
|
|||
3A21 Aluminum Sheet Physical Properties
| Temper | Thickness (mm) | Tensile Strength (Mpa) | Yield Strength (Mpa) | elongation（%） | hardness（HV） |
| 0 | >0.2-0.5 | 95-140 | ≥35 | ≥15 | 30-40 |
| >0.5-1.0 | ≥30 | ||||
| >1.0-4.0 | ≥35 | ||||
| H22 | >0.2-0.5 | 120-160 | ≥90 | ≥12 | 39-53 |
| >0.5-1.0 | ≥15 | ||||
| >1.0-4.0 | ≥18 | ||||
| H24 | >0.2-0.5 | 145-195 | ≥125 | ≥6 | 42-59 |
| >0.5-1.0 | ≥8 | ||||
| >1.0-4.0 | ≥10 | ||||
| H26 | >0.2-0.5 | 170-210 | ≥150 | ≥2 | 55-65 |
| >0.5-1.0 | ≥4 | ||||
| >1.0-4.0 | ≥6 | ||||
| H18 | >0.2-0.5 | ≥190 | ≥170 | ≥2 | 60-85 |
| >0.5-1.0 | ≥3 | ||||
| >1.0-4.0 | ≥4 |
3A21 Aluminum Sheet Chemical Composition
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Al |
| 0.5 | 0.7 | 0.2 | 1.0-1.6 | 0.05 | _ | 0.15 | 0.1-0.2 | Remainder |
3A21 Aluminum Sheet Application
1. Low load parts for working in liquid or gaseous medium. Such as Oil tanks, Gasoline, Lubricating oil pipes, Various liquid containers, and other small load parts made by deep drawing.
2. For use under conditions of higher strength than 1 series alloy. Such as Kitchen utensils, Food/chemical products processing and storage equipment, Transport tank of liquid products, Thin plate for all kinds of pressure vessels and pipe, Brazed plate-type heat exchanger, Insulation equipment, Cosmetic board, Photocopying machine drum, Marine tread plate. As for wire is used for rivets.
3A21 Aluminum Sheet Application
3A21 Heat Treatment
Homogenization annealing
Heating 510 ~ 520 °C; heat preservation 4 ~ 6h; air cooling.
Rapid annealing
Heating 350 ~ 410 °C, holding time 30 ~ 120 min with different effective thickness, air or water cooling.
High temperature annealing
Heating 350 ~ 500 °C, holding time 10 ~ 30 min when finished product thickness ≥6mm. Product thickness < 6 mm, until the heat through; air-cooled.
Low temperature annealing
Heating 250 ~ 300 °C; holding time 1 ~ 3h; air or water cooling.
Aluminum Sheet Packaging
Yongsheng aluminum sheet is placed on a wooden pallet or wooden box, wrapped perfectly with waterproof craft paper, and then fixed with a narrow strip of iron.
Usually, we have six layers of packing: put on wooden supports and put desiccant, wrap moisture proof film, wrap the plastic film, wrap the moisture-proof cotton, wrap the plastic moisture proof film again and pack it with cardboard
aluminum sheet packing process
Why Choose Yongsheng 3A21 Aluminum Sheet
1. Anti-fatigue strength, high shear strength and high elongation.
2. 3a21 aluminum sheet has excellent corrosion resistance and can adapt to humid environment.
3. The layout of the finished product is regular, without bumps, bright spots, scratches and other defects.
4. Corrosion resistance, strong stress corrosion cracking ability.
3000 Series Aluminum Sheet
The 3000 series aluminum plate is mainly 3003 3005 3A21. It can also be called anti-rust aluminum plate. The production process of the 3000 series aluminum plate in our factory is very good. The 3000 series aluminum plate is mainly composed of manganese. The content is between 1.0-1.5. It is a series with better anti-rust function. Routinely used in humid environments such as air conditioners, refrigerators, and undercars, the price is higher than the 1000 series, and it is a more commonly used alloy series.
3A21 Aluminum Sheet Manufacturing Process
Henan Yongsheng Aluminum Co., Ltd. is a company under Henan Xintai Aluminum Co., Ltd. Henan Xintai Aluminum Co., Ltd. was established in 1999, and occupies 380,000 square meters with 2100 workers. With the development, our company is honored as one of Top 100 Enterprises in Henan Province, Golden Prize for Economy and Efficiency Cup and Top 30 Enterprises in Zhengzhou.
We are a Chinese aluminum sheet factory，we main products are as following: Aluminum Plate/sheet/foil/coil/strip/circle, color-coated aluminum, aluminum checker plate, mirror aluminum plate and so on. the capacity is 300,000 MT per year, among which, 35% are exported to overseas. At the same time, we supplys to many famous aluminum company in China.
Welcome to visit our factory and look forward to establishing a long-term and good business relationship with you.
English 
Spanish 
Arabic 
German 
French