Home»Aluminum Coil»Note The Use of Color Coated Aluminum Coil In The Process

Note The Use of Color Coated Aluminum Coil In The Process


Note the use of color drawing aluminum coil in the process

First, if it is to be put into use, the temperature should not be overheated or too cold at the normal temperature. If it is used as the roof, the height should not be less than 10 degrees.

Second, before the device, check in time to ensure that the material of the roof has no wear appearance, to ensure that it can be used normally, and to ensure the service life under normal circumstances.

Third, the bolt head of the fixed color coated aluminum roll should be sealed with strong waterproof material to avoid the rain into the rust.

Fourth, the environmental temperature of the color coated aluminum coil processing should be above 7℃, according to the thickness of the color coated aluminum coil to adjust the gap of the processing roller system, and remove the foreign matter on the roll surface and supporting plate; At the same time to check the color coated aluminum roll is not paint, such as paint, should find out the reason and adopt measures to continue processing.

To ensure the construction quality of color coated aluminum coil, it is necessary to carry out the installation in strict accordance with the above conditions.